Tag Archives: bracelet

Decoupaged Bracelets, Part II

Standard

13459509_10209541029433006_1550319988_nYes, I’m obsessed.  I made another bracelet this morning.  This time, I painted the bracelet purple and stuck on some pansy stickers I had in my craft collection. The stickers were designed for scrapbooking.  I had to finagle the flowers a little to get them to remain flat, but once that was accomplished, I gave the whole bracelet three coats of gloss ModPodge.  I love it!

If you’re interested in making some bracelets, here is the link I used to order them from Amazon: https://www.amazon.com/imagine-Bangles-Narrow-Unfinished-Bracelet/dp/B01FWJGWS2/ref=sr_1_2?s=arts-crafts&ie=UTF8&qid=1466106108&sr=1-2&keywords=wood+bracelets.

Decoupaged Bracelets

Standard

13457609_10209532319095253_220700080_n

I love, love, love this project! Using plain wooden bracelets, I transformed two into high fashion!

13444208_10209532112570090_526495007_n

My first project was the green and yellow one. Using an old calendar page with some impressionist art, I cut out small strips of color.

13474033_10209532112650092_268569085_n

I then painted on gloss ModPodge to the outside of the bracelet, about 1/2″ at a time, and glued down the strips. Messy but easy. I let the strips hang, not yet gluing them to the inside. I gave the outside one good coat of ModPodge to ensure the strips were glued down well.  I went on to another project (pickling cukes from my garden!) as they bracelet dried.

13453705_10209532114050127_535936537_n

Then I tackled the inner part of the bracelet. I first trimmed the strip ends to make them more uniform. I forgot to take a picture of this step until I worked on the second bracelet.

13459744_10209532114570140_552793460_n

About an inch at a time, I glued down the ends with ModPodge. I used my fingers to press and rub them until they were well stuck.  I then used two longer and wider strips to glue along the inside, making sure to cover any wood they still showed. I gave it all an additional coat of ModPodge to seal it, and set it aside to dry.

13459640_10209532114210131_138825793_n

For my second bracelet, I used a map of Louisiana from an old atlas. I made sure I cut some strips so that place names would show. I glued the “Louisiana” label to the inside after following all the procedures described above.

13453965_10209532319295258_1035081361_n

I’d be hard pressed to tell you which one I like the best, but I know I’ll do this project again soon.  Cheap, easy, and attractive?  My kind of project!